To study the basics of linear/angular measurement methods like chain surveying, compass surveying
To study the significance of plane table surveying in plan making
To know the basics of leveling and theodolite survey in elevation and angular measurements
To understand tacheometric surveying in distance and height measurements
Course outcomes:
On completion of the course, the students will be able to:
acquire practical knowledge on handling basic survey instruments including leveling.
use conventional surveying tools such as chain/tape, compass, plane table and level to perform structural plotting and highway profiling
take accurate measurements and knowledge in field booking, plotting and adjustment of errors
develop contour map of given area.
SURVEY LABORATORY – II
COURSE OBJECTIVES:
To understand the basics and elements of different types of curves on roads and their preliminary survey
To learn about surveying applications in setting out of curves, buildings, culverts and tunnels
To get introduced to different geodetic methods of survey such as triangulation, trigonometric leveling
To learn about errors in measurements and their adjustments in a traverse
To get introduced to modern advanced surveying techniques involved such as Remote sensing, Total station, GPS, Photogrammetry etc.
COURSE OUTCOMES:
On completion of the course, the students will be able to:
acquire practical knowledge on handling survey instruments like Theodolite, Tacheometery and Total station
carry out Triangulation and Astronomical surveying including general field marking and curves setting.
take accurate measurements andapply mathematical adjustment of accidental errors involved in surveying measurements
gain adequate knowledge in effective utilization of total station for various engineering projects
LIST OF MAJOR EQUIPMENT:
Theodolite with stand
Total Station with stand
Dumpy Level with stand
Tilting Level with stand
Plane table with necessary accessories
Surveyors Compass & Hand Held GPS
Chain
Prismatic Compass
Dumpy Level
Plane Table & Apparatus
STRENGTH OF MATERIALS LABORATORY
COURSE OBJECTIVES:
To expose the students to the testing of different materials under the action of various forces and determination of their characteristics experimentally
To find the Young Modulus, torsional strength, hardness, compressive and tensile strength of given specimens
To find impact value of metal specimen and crushing value of coarse aggregates
To find stiffness of open coiled and closed coiled springs
To find the physical properties of given coarse aggregate, fine aggregate and cement samples
COURSE OUTCOMES:
On completion of the course, the students will be able to:
acquire knowledge in the area of testing of materials and components of structural elements experimentally.
find stiffness of open coiled and closed coiled springs
determine the physical properties of given coarse aggregates, fine aggregates and cement samples
LIST OF MAJOR EQUIPMENT:
Universal Testing Machine 40t Capacity
Muffle Furnace
Izod/Charpy Impact Testing Machine
Torsion Testing Machine 100N Capacity
Spring Testing Machine 250kg Capacity
Brinell Hardness Testing Machine
Fatique testing machine
Mechanical Extensometer
ENVIRONMENTAL ENGINEERING LABORATORY
COURSE OBJECTIVES:
To understand the sampling and preservation methods and significance of characterization of wastewater.
To learn the basics of sewage composition and its characteristics
To depict the information about various sewage treatment processes
To provide the adequate information on various disposal standards for industrial effluents
COURSE OUTCOMES:
On completion of the course, the students will be able to:
analyze the status of surface water and ground water quality and the remediation technologies
characterize wastewater and conduct treatability studies.
determine the sewage characteristics and design various sewage treatment plants
manage hazardous wastes, risk assessment and treatment technologies
apply environmental treatment technologies and design processes
LIST OF MAJOR EQUIPMENT:
Spectrophotometer meter
Deep Freezer
COD Digestion apparatus
Ultra pure water purification system,
Gas chromotograph with accessories BOD Incubator
COD Apparatus
Muffle Furnace
Hot Air Oven
COMPUTER AIDED BUILDING DRAWING LABORATORY
COURSE OBJECTIVES:
To introduce the students to draft the plan, elevation and sectional views of building in accordance with development and control rules satisfying orientation and functional requirements as per Nation al Building Code.
COURSE OUTCOMES:
The students will be able to draft the plan, elevation and sectional views of the buildings, industrial structures, framed buildings using computer software.
COMPUTER AIDED DESIGN AND DRAWING LABORATORY
COURSE OBJECTIVES:
To acquire hands on experience in design and preparation of structural drawings for concrete / steel structures normally encountered in Civil Engineering practice.
COURSE OUTCOMES:
At the end of the course the students acquire hands on experience in the
design concept of various structures and detailing of reinforcements
design of underground and elevated liquid retaining structures
design of material storage structures
effect of temperature on concrete structures
design of bridges subjected to IRC loading
LIST OF MAJOR EQUIPMENT:
Auto CAD
Revit Architecture
Stadd Pro
E TABS
Ansys
CONCRETE & HIGHWAY ENGINEERING LABORATORY
COURSE OBJECTIVES:
To learn the principles and procedures of testing Concrete and Highway materials and to get hands on experience by conducting the tests and evolving inferences
To understand the properties of ingredients of concrete and behavior of concrete at its fresh and hardened state
To study about the concrete design mix and to know about the procedures in concreting
To determine some of the properties of coarse aggregates and bitumen
COURSE OUTCOMES:
On completion of the course, the students will be able to:
test all the concrete materials as per IS code design the concrete mix using IS code methods determine the properties of fresh and hardened of concrete
design special concretes and their specific applications ensure quality control while testing/ sampling and acceptance criteria
know the techniques to characterize various pavement materials through relevant tests
infer the suitability of these materials for construction of road and to understand the theoretical concepts learned in the course transportation engineering
LIST OF MAJOR EQUIPMENT:
Concrete mixer
Compression testing machine 2000KN capacity
Vibrating table(1mx1m)
Los angles abrasion testing machine
Marshal Stability Apparatus
Pensky marten Apparatus
Ring and Ball Apparatus
SOIL MECHANICS LABORATORY
COURSE OBJECTIVES:
To gain adequate knowledge in assessing both Physical and Engineering behavior of soils through laboratory testing procedures.
To estimate index properties of soils (coarse and fine)
To estimate consistency limit of fine grained soils
To estimate shear strength of soils
COURSE OUTCOMES:
On completion of the course, the students will be able to:
classify soil by physical observation of the soils
classify soil based on estimated index and engineering characteristics of soils
know the techniques to determine index properties and engineering properties such as shear strength, compressibility and permeability by conducting appropriate tests
carry out interpolation among the estimated soil design parameters
